Mobile machining. Resurfacing thrusting side tyres for cement kiln.

Machining flange for crane.

Mobile machining live rings and rollers to rotary kilns.

Line drilling for rudder shaft.

Result after internal orbital overlay welding.

The axle trunnion of a 110 ton bucked wheel was worn-out and overhauling was necessary.

The support of the live ring needed overhauling.

Bogies on this ship loader needed to be changed.

The entire job involved disassembly, line drilling and installation of new bogies on a ship loader for LKAB in Narvik.

Mobile turning of a magnetite mill.

Processing of overlay welded internal faces of mounting lugs by line drilling, to machine out the required diameter

Internal orbital overlay welding on mounting lugs for hydraulic cylinder for repair of wear-related damages.

The bucket wheel was buried 18 foot down in the ground to get access to the axle trunnion with Ø 420 mm and mounting of the new bushing, which was fabricated by Maskinering AS.

The running surface rings and support rollers on rotary cement kilns were machined by turning; at Kunda Nordic Tsement in Estonia.

The hatch frame to the cooler on a ship needed to be face milled to achieve sealing.

On the nose gate of Torghatten AS's ferry "Landegode" bolts and bearings on the gate mounting brackets needed to be replaced. The job involved line drilling as well.

Line boring excavator drawer.

Mobile machining of mount for thrusters, diameter:1350mm

Line drilling was performed in conjunction with repair of the link of a dumper.

Line drilling as preparation for installation of new bogies

Wear on the bearing face of the main shaft of the fan for a cement kiln was repaired by overlay welding and mobile turning.

The outer surface of running surface rings with Ø 8000 mm and width of 1200 mm on a rotary kiln for refining of ores was machined by turning; at LKAB in Kiruna, Sweden